1780's striped robe à l'anglaise at Kuninkaan päivä

This post is mostly about photos of the gown because I already explained the construction and other detailed stuff about it in the earlier post. For once I got some pretty nice photos of the outfit from the day, which was really great because usually I end up having only a couple of blurry photos as I get back home from events and I really don't feel like posting those on the blog.

Photo: Mika Seidler

The next few shots were taken during the 18th century fashion show...

Photo: Teemu Laukkarinen

You can see the front quite well in the picture below. The zone front with tabs was inspired by the striped robe à l'anglaise at Met.

Photo: Teemu Laukkarinen

I didn't wear many accessories with the gown. I really wanted to have a red ribbon round my neck but unfortunately I left it at home or lost it at the dressing room, which wouldn't be a surprise as the dressing room was so full of everyone's costume parts and other things.

I was moving so some parts are a bit blurry...

Photo: Mika Seidler

I definitely should have had a huge and poofy neckerchief to complete the pigeon profile but I'll make one some other time. I'm thinking about something with ruffles like the neckerchief on the Met gown...

Photo: Teemu Laukkarinen

After the show...

Photo: Mika Seidler

Then I went out for a short stroll because it got really hot inside after the show. Thanks to Mika Seidler I also got some photos of the dress outdoors. First off, here are a couple of shots I took from outdoors. The only decent photos I got from the event anyway... Below, musketeers with mamaselli Tirpukka (from Tirbuck) and Gouvernante Astrid (from Pohjan sodasta Suomen sotaan - elämää 1700-luvulla) wearing an early 18th century mantua with fontange headdress.

Katariina Augustintytär (from Before the Automobile), wearing her beautiful riding habit. It was so nice to meet her again. 

And then, some more shots of my striped robe à l'anglaise...

The huge bum pad gives the dress a very nice swayback profile at the back.

The hem is trailing...

The hedgehog hairstyle is all my own hair. Credits to baroness von Mannheim (from Couture Mayah) who made my hair look good and thanks to her I also learned how to do this hairdo on my own.

For the evening I wore the dress with white petticoat with small stripes, added a few feathers to my hair and tied a belt with buckle round my waist. As you can see, the attempt to lift the train with strings failed because the hem is so long. However, I'll fix that with a third string and loop.

Photo: Jarno Manninen

Final thoughts:

Overall, I'm happy with this dress and it has to be my favorite from my own gowns so far. However, looking back at the photos of the original gown I realize there are many differences between the original(s) and my dress. The differences don't bother me but I'd still like to point some of them out. Firstly, the stripes of the original dress are probably a couple of millimeters wider than the stripes of my dress which are about 1 cm wide.

Photo by Rebecca Thelin, via Flickr.

The purple stripe color is definitely of different shade. The purple of the museum dress seems more reddish than the stripe color of my gown which is a purple much more towards blue. It's really hard to tell what kind of purple the original is because it's quite different in different photos I've seen of it. When it comes to colors of photos, so much depends on several things, such as the lighting of the surroundings. And I assume some of the photos are probably edited - for example, take this photo and compare with this.

Photo by Loren Dearborn, via Flickr.

Also, the back side of my dress is quite different from the original. Firstly, the stripes form a slightly different pattern. In order to imitate the pattern of the original I probably should have draped the gown. However, I don't have a dress dummy so I couldn't do that. Secondly, I now realize the curve of the waistline at the back of the dress is much more radical in the original dress, whereas my dress has a more smooth line there. Also, the pleats at the waist are probably even tinier than the pleats of my gown.

Photo via Flickr.

There are probably a lot more differences but I'm not so keen on listing everything here. These were just the obvious ones. Again, I'm not so bothered by them anyway. :) What I'm still slightly bothered about is that the dress doesn't fit perfectly next to the armscye at the backside. It still wrinkles for a bit even if I tried to alter the fit during the mock-up fitting and bodice fitting. I suppose there's still some extra space at the armscye and that I'll have to pinch in a little at the armscye where the wrinkles appear before I make a new dress with the pattern. Or lower the armscye for a bit. Or do both. You'll hear more about it some time in the future. Until then...

Sources:

Fashioning Fashion, European fashion in detail, 1700-1915 by Sharon Takeda, Kay Spilker and Kimberly Chrisman-Cambell
Fashioning Fashion exhibit video
Fashioning Fashion exhibit virtual panorama
Fashioning Fashion exhibit photos by Loren Dearborn
Fashioning Fashion exhibit photos by Rebecca Thelin
Robe à l'anglaise (LACMA) photo I from Fashion is poison blog

Robe à l'anglaise (LACMA) photo II from Romancing the Tome blog

Robe à l'anglaise (1787) pattern via Costumer's Manifesto 

Robe à l'anglaise (1785-87) from MET digital collections

Other striped gowns:

A lady's open robe of silk taffeta from Christie's

Open robe from National Museums Northern Ireland

Thanks to everyone who allowed me to post their photos on the blog! I'm ever so grateful! :) Special thanks to Maria Nordback for arranging the Kuninkaan päivä event and to baron and baroness von Mannheim for hosting me during the weekend. 

Striped robe à l'anglaise - construction and inside-out photos

I finished the striped robe à l'anglaise early in time for last Saturday's event. It was finished two days before the day I had to leave for the train that took me to the place where the event was held. I will post more about the event itself later on. Anyhow, today I got around to take some pictures of the gown on the floor for you to see. I did take photos of the fittings etc. but I didn't really have time to post on the blog until today. So here we go...

The finished gown... overall! As you can see the skirt part is a lot longer that the front because I wanted this dress to have a long train. Have I told you how much I love trains? They're definitely not practical and as I started making this I knew people would step on it a gazillion times - I was right. However, the hem took very little damage during the event and it doesn't really show at all. No dirt, nothing. That was a pleasant surprise.

Without the petticoat...

 

The back-side of the dress. I'm glad I took the time to tweak the back side to make it as similar on both sides as possible (stripe-wise).

And now, the construction: I started by sewing up the whole bodice together. Note there are zone front seams on the outside of the dress but it was unnecessary to have those seams in the lining as well. Also, there are bones in the center front edges and in the center back and center back side seams.

After the bodice was made, I added the rest skirt panels and pleated the upper edges with the help of needles and stitched them together with back-stitch by hand. The pleats are quite tiny, approximately 4-3 mm wide.

In the photo below, the pleats are pinned to the bodice. Leo is super social and he always loves to hang out with me whatever I do. I just have to be really careful about what he's doing while I'm sewing and he's around... Luckily he just mostly sleeps... Oh, and he does love being photographed, too, unlike our another cat that dislikes the flash-light. Leo really tries to photo-bomb in most of the pictures I take at home...

Back from cats to the gown construction. In the photo below, the pleats are sewed to the bodice.

The stitches are basically visible on the outside of the gown but they're so tiny you can barely see them.

The pleats were ironed towards the hem. The tape loop is for gathering up the skirt. It's there purely for practical reasons - I have to be able to lift up the train for dancing.

The whole hem was sewn by hand. Original dress hem for comparison.

Picture via Flickr.

At this part, the whole dress was finished except for the sleeves. I made a mock-up for the sleeves and tried it on with the dress itself. I could have tried the sleeve mock-up much earlier while I was trying on the bodice mock-up but this way I thought I could save time.

 I was happy and relieved to notice that the sleeve mock-up fitted surprisingly well. The only part I altered was the elbow that was a bit too pointy. At this part I had also added the hooks and eyes so the dress could be closed easily for the sleeve fitting.

Then I just cut out the sleeves in both lining and dress fabrics and sewed them up. I didn't take photos during the final check fitting. I had some problems fitting the shoulder part on my own but eventually it went alright. You'll be able to judge the shoulder fit when I post pictures of the gown being worn in the near future. Here's the inside of the finished bodice with sleeves and hook and eyes.

A closer shot of the inside of the bodice...

The back of the dress with sleeves...

And front...

All of the visible stitches in the outside of the dress are sewn by hand. 

Again, the sleeve of my dress and the original sleeve for comparison...¨

Photo via Flickr.

The hem is really long. There are two gores (one on both sides) to make the skirt even fuller. I couldn't take a picture of the whole hem because there's not any place in our apartment with enough free space on the floor. You can get an idea of the length of the hem from the photo below...

I thought I'd prefer the petticoat without any decoration. However, I added the ruffles in the end because of three reasons. Firstly and mainly, the ruffles give more volume to the skirt of the gown itself. Secondly, I thought the petticoat was a bit dull with noting on it and, thirdly, the ruffle part shows where the skirt of the dress ends and petticoat starts. Otherwise they would just blend in and the gown looked almost like it was a round-gown. The ruffle panels were pinked in the same way as my earlier petticoat... 

Aaand, that's pretty much everything about the construction and fittings... Woah, this turned out to be one really long post... Here in the end I'd like to thank Rebecca Thelin for allowing me to post her pictures of the original gown from the Fashioning Fashion exhibit. 

W.I.P.: Striped robe à l'anglaise

Here's a little post about my progress with the striped robe à l'anglaise as promised! First off this week, I sewed up the petticoat. I'm really starting to think it needs some ruffles but I haven't decided yet. I'll have to see how tight I'm with fabric at the end anyway so that decision is saved for later.

Next, I drew the pattern for the bodice and made a mock-up. It was pretty good in the front. I just wanted to make the center front a little longer.

However, the back side of the bodice was a mess! So many wrinkles everywhere!

Problem solved: The back was too baggy and it needed to be tightened. Also, I had to change the shape of the armholes (see on the left side).

After making the changes to the pattern, I finally started cutting the dress itself and this is where I'm at at the moment:

 I think I still need to tweak the the back side since I'm not happy with the stripes not forming 100% similar pattern on both sides. Though, I noticed that the stripes weren't that perfect in the original (via Romancing the Tome blog) either. I guess it would be "period" to leave it this way, too, but I'm too much of a perfectionist to do that. I also think I need to add a waist band to the inside of the dress in order to keep the back tightly in the right place. I'm going to be gone for the weekend but hopefully I can continue sewing the dress on Moday. "See" you next time!